Which Filament Should You Use for Cookie Cutters? PLA, PETG and More
November 16, 2026
You already have the STL file and your printer is ready. Now comes the big question: which filament should you use? The material affects how clean the cut is, how long your cutter lasts and how safe it is to use with dough. Here is a simple guide.
Quick answer
For most bakers, PLA or PLA+ is the best choice. It is easy to print, rigid enough to cut dough cleanly and available everywhere. If you want a cutter that tolerates a bit more heat, PETG is a good second option.
PLA: the favorite for cookie cutters
- Pros: very easy to print, sharp details, rigid edges and low cost.
- Cons: it softens at around 55 to 60 °C, so hot water, the dishwasher or a hot car can deform it.
- Ideal for: almost every cutter in our catalog.
PLA+: a little tougher
PLA+ prints almost like regular PLA but is less brittle, so thin edges are less likely to crack when you press hard on cold dough. It is a great option for designs with fine details.
PETG: more resistant to heat
- Pros: tolerates more heat than PLA and is slightly flexible, so it rarely breaks.
- Cons: it is a bit harder to print and tends to leave thin strings between parts.
- Ideal for: cutters you use very often or that you need to wash with warm water.
Materials we do not recommend
- ABS and ASA: they release fumes while printing and are usually not suitable for contact with food.
- TPU: it is too flexible; the edge bends instead of cutting.
- Resin: uncured resin is toxic and most resins are not made for food contact.
What about food safety?
Choose a filament that the manufacturer labels as suitable for food contact, ideally in a natural color without pigments. Use a stainless steel nozzle if you can, since some brass nozzles contain small amounts of lead. Remember that layer lines can hold dough, so wash your cutters well after each use. We explain all of this in detail in our article Are 3D Printed Cookie Cutters Food Safe?
Recommended print settings
- Layer height: 0.2 mm, a good balance between speed and a smooth edge.
- Walls: 2 to 3 perimeters for a strong cutting edge.
- Supports: not needed; all our designs print flat on the bed.
- Size: our designs measure 7.5 cm on the longest side; scale them in your slicer if you need another size.
Care tips
Wash your cutters by hand with lukewarm water and mild soap, dry them right away and store them away from the sun. If a cutter gets scratches or cracks that you can not clean, print a new one: that is the advantage of having the file!
Ready to print? Browse our collections and download your favorite designs today.